| PRACTICAL REPAIRS - PLUMBING REPAIR GUIDE FEATURED ARTICLE |

| plumbing repair | plumbing repair guide | repair plumbing |
| This simple pressure-bypass valve is added to the water heater to release excessively hot water, thereby protecting your home from the possibility of a dangerous explosion. Located on the top or side of your heater, the valve should be connected to a short pipe that leads downward toward the floor. In some installations it may connect to a floor drain. It's a good idea to have the discharge line attached to a drain line or directly into a drain. While they are not truly overflow pipes, they do permit water to escape from the tank if the thermostat has failed. - Read the Full Article HERE - |
| Troubleshooting a Leaking Hot Water Heater Discharge Pipe Imagine that one day you discover a puddle of water on the floor below your hot water heater. Immediately, alarm bells begin to ring in your head. No one looks forward to calling a plumber for even the simplest service job. Plumbers are Just how important a problem is it if your water heater is expensive and there's hot water leaking all over the floor, now. Fortunately, the source of your problem is likely to be the T&PR valve, which is an easy service to make yourself. On the top or on the side of it you should see three connections. A visual inspection of your water heater will reveal both the cold and hot water lines, as well as a discharge line mounted either on the top of the side of the heater. Part of the discharge line includes a brass valve with a lever attached to it. The brass T&PR valve on the discharge line may or may not be the cause of the water leak. The valve functions properly when it releases overheated water from the water heater. |